![]() |
![]() |
Speed throttle for boat / water transport

EZ-10 Joystick working principle
Joystick can work in two modes
If enabled, the controller can drive the motor in two directions without need to use any reverse switch.
This means that just one single throttle can drive the motor on forward and reverse direction.
Most of the times, this setting will be useful for electric boat projects.
How to achieve this effect
You need to enable Joystick setting in KMC user interface while using 0-5V throttle.
How it works
You will start the motor from 2. 5V position where - 2. 6V to 5V will be forward and 2. 4V to 0V will be backward (check picture bellow for the reference).
2. 4V to 2. 6V will be the throttle dead zone (Zero speed) which can be adjusted in the application.
Please be aware that joystick will not spring back to original position if you release the throttle.
When joystick setting is disabled, it will work on the normal mode, where speed will be increased from 0V to 5V to one direction.
|
We are trusted by: